Barry Melek Electric Train Sets

Light Power

Solar LED lighting is great potential for use in the western region

The world energy supply security concerns and actions to address climate change, promoting renewable energy technologies around the world and the rapid development of industries, such as solar power, wind power generation on-year growth rate in more than 20%. Renewable energy has become to diversify energy sources, to address global climate change and achieving sustainable development an important alternative energy sources. Especially in the last two years, with fluctuations in international oil prices and the "Kyoto Protocol" came into effect, renewable energy development into an international energy hot spots, has been widespread concern in many countries. The end of 2006, global installed capacity of renewable energy generation breakthrough 200 million kilowatts, of which about 80 million kilowatts of small hydropower, 75,000 kilowatts of wind power, geothermal power, 10 million kilowatts, 700 kilowatts of solar power, solar PV annual growth rate of more than 60% production capacity close to 200 million kilowatts.

Energy-saving advantages of solar lighting

With economic development, China will greatly increase the lighting power, green energy-efficient lighting research and application, will be more and more attention. Solar LED lighting products as a cold light source with a higher cost, green, safe, reliable, stable quality, long life, easy installation and maintenance, etc., can be widely used in green lighting, road lighting, advertising light box lighting, urban landscape modeling lighting and home lighting systems, solar LED lighting, but a higher one-time investment is the development bottleneck.

Currently, lighting consumes about 20% of the entire power consumption is about to reduce lighting energy consumption is an important way. To achieve this goal, the industry has developed a variety of energy-saving lighting appliances, and have achieved some results. However, from the "green light" requirement is also far, development and application of more efficient, reliable, safe, durable, new light is imperative.

The end of 2006, the amount of renewable energy totaled 200 million tons of standard coal (excluding traditional biomass), representing about 0.5 percent for 2010, renewable energy accounts for the total primary energy consumption 10% of the target taken a solid step forward. At present, China is in the following areas to promote the domestic PV market: First, start the transmission to the village projects; 2, in particular the use of photovoltaic power generation projects, such as the World Expo, the Olympics and so on; 3, in the desert PV power plant construction; 4, the roof started to mobilize a number of cities plan; 5, and study and improve the competitiveness of PV electricity price policy (90% of photovoltaic products exports and the lack of domestic market, may limit China's PV industry long-term development. Once there is a change of foreign policy or the photovoltaic industry to protect their own industries to take measures to restrict imports, China has launched a large number of PV projects will face difficulties).

Solar lighting technology innovation

LED low power consumption, extraordinary life has been widely applied to signal instructions to the field of digital display weak. However, conventional LED light source as the opening angle is small, point size, high brightness, light scattering is highly directional, spot light is easy to form, good optical uniformity and other factors, binding its application in the lighting field.

Through the structure of traditional solar lighting, intelligent controller, the angle of light reflection to update and technical improvements, the optimal tilt angle design to complement flat head and round, making it more uniform light, overall brightness higher, the cost low, more conducive to application of the promotion.

Flat head of the column and the torch-style LED combination light structure, through the rational control of ultra-high brightness white LED flat head installation angle, so that combination of light emitted by LED lighting and illumination uniformity of light have increased dramatically. The technology not only makes light effects to enhance, but only the combination of light energy about 4W, the brightness of light emitted by energy-saving lamps up to 20W or 40W incandescent brightness, more effective use of solar energy. 12W solar cells only need the capacity, 12V/24Ah the battery can ensure that such LED light source in five rainy days of the effective work, and, the service life of 100,000 hours or more, for more than 10 times the energy-saving lamps.

Specially developed for the field of combination lamps for light sources?? Cross-shaped and rectangular combination light source, and give full play to open flat head LED light uniformity good angle and great light round area of high brightness LED point advantage, so that the two complement each other to maximize the light effect, to overcome the flat head area LED point light as Round LED, and the round LED light uniformity as flat head LED shortcomings.

In the controller, the use of solar photovoltaic technology, to maximize energy collection, energy reserves in the completion of the battery to the light source to provide 12V DC power supply, so that light source produces 6500K white light. Also, by streamlining the intelligent controller structure, its structure is simpler, lower failure rate, in order to further reduce the cost of doing the technical preparation. Moreover, by detecting the solar cell output and battery power to determine the system working state, to achieve automatic control of the whole system and intelligent management.

Popularization and application of solar lighting

As a new green solar energy, with its unparalleled advantages in the rapid popularization and application. As a fourth generation light source, in the city lighting and landscaping, road lighting, garden lighting, indoor lighting, and other areas of lighting, and applications have been used effectively. Especially in remote areas without electricity, solar lighting and a more extensive application.

Most people think that energy-saving lamps can be energy-saving 4 / 5 is a great initiative, but also saving energy-saving lamp LED than 1 / 4, this is a great innovation of solid light. In addition, LED light, also has high quality, almost no radiation, reliable and durable, very low maintenance costs and other advantages, typical of the green lighting.

The successful development of ultra-bright LED, greatly reducing the cost of solar lighting to use, so that at or near the early-frequency AC lighting system installed cost offer, and has the protection of the environment, ease of installation, operation security, economic and energy saving. As the LED light with high efficiency, low heat advantage, have been increasingly used in the lighting field, and showed a trend to replace traditional lighting.

In western China, non-trunk solar lights, solar garden lights gradually became scale. With the vigorous development of solar lamps, the "green light" will become a trend.
About the Author

I am an expert from Hardware Wholesale, usually analyzes all kind of industries situation, such as light tower generator , fluorescent work lamp.

Design Pro LED Undercounter Light Power Cord Accessory by Kichler $7 The Kichler Design Pro LED Undercounter Light Power Cord Accessory is designed for use with the Kichler Design Pro LED Direct Wire system. Includes a 38" power cord with plug. Since 1938, Cleveland-based Kichler Lighting has created exceptional lighting in a variety of styles, finishes, colors and designs. With a diverse collection of indoor and outdoor lighting in classic and contemporary styles, Kichler Lighting always focuses on making home lighting that is both beautiful and functional. The Kichler Design Pro LED Undercounter Light Power Cord Accessory is available with the following: Details:White plastic38" power cord with plugUL ListedShipping: This item usually ships in 3-5 days. Dimensions: Fixture: Length 40 In.

Power Extender by Tech Lighting $29.6 In a Monorail system, the Power Extender by Tech Lighting can be added to a power feed canopy or surface transformer to drop power from the ceiling. Available in three finishes and several field-cuttable lengths. Note: For dual-feed canopies and transformers, order two. Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Power Extender is available with the following: Details: Metal finishField-cuttableETL ListedOptions:Finish: Antique Bronze, Chrome, or Satin Nickel. Size: 3", 6", 12", 24", 36", 48", or 96".Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Length Adjustable from 3 In. to 96 In.

Power Vault Adapter by Tech Lighting $44 The Power Vault Adapter by Tech Lighting is used to power a Monorail system when it's installed on a vaulted ceiling. The Power Vault Adapter installs to the power feed (sold separately) and adjusts to any angle in order to properly position rail parallel to the floor. Available in three finishes. Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Power Vault Adapter is available with the following: Details:Metal finishETL ListedOptions:Finish: Antique Bronze, Chrome, or Satin Nickel.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Length 1.6 In., Width .6 In.

Railtones Power Adapter by Tech Lighting $20 For use with the innovative Tech Railtones speaker system, which can be mounted to most track lighting systems. The Tech Lighting Railtones Power Adapter plugs into any standard outlet and provides power to the Railtones wireless transmitter. Tech Lighting, located in Skokie, IL, develops lighting under the belief that the latest and best new product innovations are the result of quality craftsmanship, attention to even the smallest design detail and drive to consistently bring you something new. The Tech Lighting Railtones Power Adapter is available with the following: Details:Provides power to the Railtones wireless transmitterNot needed when transmitter is plugged directly into a USB port on a computerETL ListedShipping: This item usually ships within 3 to 5 business days.

End Power Feed by Tech Lighting $50.4 The Tech Lighting End Power Feed is used to bring power to a Monorail system when the transformer cannot be located directly above the run. The End Power Feed can be mounted to a standard 4" junction box or directly to a remote transformer, then pushed into an end of the Monorail. Available in three finishes. Tech Lighting, located in Skokie, IL, develops lighting under the belief that the latest and best new product innovations are the result of quality craftsmanship, attention to even the smallest design detail and drive to consistently bring you something new. The Tech Lighting End Power Feed is available with the following: Details: Metal baseRound canopy 12' field-cuttable softwire leadsMounts to standard 4" junction box or directly to remote transformerETL ListedOptions:Finish: Antique Bronze, Chrome, or Satin Nickel.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Ceiling Canopy: Diameter 4 In.

Design Pro LED Power Supply Leads by Kichler $34 Read first! This item is part of the Design Pro LED System. There are four steps to completing this Design Pro System; you have to configure-to-order this item. See below for details. The Kichler Design Pro LED Power Supply Leads should be used to connect to related Remote Power Supplies only. The Supply Leads have a CL2 jacket that is suitable to be run behind walls. Connect either the male or female plug to the fixture or switch. The plug on the other end is cut off and the two leads are connected to the terminals on the Remote Power Supply. Since 1938, Cleveland-based Kichler Lighting has created exceptional lighting in a variety of styles, finishes, colors and designs. With a diverse collection of indoor and outdoor lighting in classic and contemporary styles, Kichler Lighting always focuses on making home lighting that is both beautiful and functional. This system requires additional steps for completion. Select and purchase additional needed parts from the list of related itemsbelow. To complete your Undercounter system, you need to select and purchase: Design Pro LED Light and/or Design Pro LED Disk Light, optional Dimming Switch or Nightlight, Interconnect Cables, and Power Supply. Please call customer service for any questions. This configure-to-order Design Pro System requires 4 steps for completion: (See below for more details.) Step 1. Select your choice of light fixture size and finish (Design Pro LED and/or Design Pro LED Disk), Disk Connector, optional Disc Wire Extension. Step 2. Select an optional Dimmer Switch or Nightlight. Step 3. Select quantity, size and finish of Interconnect Cables. Step 4. Select Power Supply. Step 1. DesignPro LED Light: Select the desired size andfinish of Lights you would like by adding each new style to the shopping cart and continuing to add to the cart until the desired number of lamps has been chosen. This is also a good time to select any Design Pro LED Disk fixtures for your configuration. After choosing your lights, select an optional Dimmer or Nightlight. If you do not wish to choose one, proceed to Step 3: Interconnect Cables. Step 2. Optional Dimmer Switch and Nightlight: Choose an optional Dimming Switch or Nightlight for your system. Use a Dimming Switch to control the light level. Use a Nightlight when a low light level is desired. Next, select your Interconnect Cables. Step 3. Interconnect Cables: Select the quantity, size, and finish of Interconnect cables. For additional different sizes, select item and add to cart one piece at a time. The Internet cables connect multiple fixtures together. Next step is choosing your power supply option. This is part of Step 4. Power Supply: Select your desired Power Supply. Choice includes: Under Cabinet Mounted Power Supply, Remote Control Power Supply Choose a Design Pro Power Supply Lead with the Remote Power Supply option, or Plug-In Power Supply. The Kichler Design Pro LED Power Supply Leads is available with the following: Detail

Power Outside Rigger by Tech Lighting $268 The Tech Lighting Power Outside Rigger extends up to three feet from the wall to support and power feed a cantilevered Monorail system from a remote transformer. Available in three finishes. For use with a single-feed remote transformer (sold separately). Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Power Outside Rigger is available with the following: Details:Metal constructionIncludes one 4" round and one 2" square wall plateField-cuttableETL ListedOptions:Finish: Antique Bronze, Chrome, or Satin Nickel.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Extension 36 In.

Design Pro LED Remote Power Supply by Kichler $166 Read first! This item is part of the Design Pro LED System. There are four steps to completing this Design Pro System; you have to configure-to-order this item. See below for details. The Kichler Lighting Design Pro LED Remote Power Supply requires a Power Supply Lead to be selected. Since 1938, Cleveland-based Kichler Lighting has created exceptional lighting in a variety of styles, finishes, colors and designs. With a diverse collection of indoor and outdoor lighting in classic and contemporary styles, Kichler Lighting always focuses on making home lighting that is both beautiful and functional. This system requires additional steps for completion. Select and purchase additional needed parts from the list of related itemsbelow. To complete your Undercounter system, you need to select and purchase: Design Pro LED Light and/or Design Pro LED Disk Light, optional Dimming Switch or Nightlight, Interconnect Cables, and Power Supply. Please call customer service for any questions. This configure-to-order Design Pro System requires 4 steps for completion: (See below for more details.) Step 1. Select your choice of light fixture size and finish (Design Pro LED and/or Design Pro LED Disk), Disk Connector, optional Disc Wire Extension. Step 2. Select an optional Dimmer Switch or Nightlight. Step 3. Select quantity, size and finish of Interconnect Cables. Step 4. Select Power Supply. Step 1. DesignPro LED Light: Select the desired size andfinish of Lights you would like by adding each new style to the shopping cart and continuing to add to the cart until the desired number of lamps has been chosen. This is also a good time to select any Design Pro LED Disk fixtures for your configuration. After choosing your lights, select an optional Dimmer or Nightlight. If you do not wish to choose one, proceed to Step 3: Interconnect Cables. Step 2. Optional Dimmer Switch and Nightlight: Choose an optional Dimming Switch or Nightlight for your system. Use a Dimming Switch to control the light level. Use a Nightlight when a low light level is desired. Next, select your Interconnect Cables. Step 3. Interconnect Cables: Select the quantity, size, and finish of Interconnect cables. For additional different sizes, select item and add to cart one piece at a time. The Internet cables connect multiple fixtures together. Next step is choosing your power supply option. This is part of Step 4. Power Supply: Select your desired Power Supply. Choice includes: Under Cabinet Mounted Power Supply, Remote Control Power Supply Choose a Design Pro Power Supply Lead with the Remote Power Supply option, or Plug-In Power Supply. The Kichler Lighting Design Pro LED Remote Power Supply is available with the following: Details:Made of steel Energy EfficientUL ListedOptions:Wattage: 100 Watt, or 200 Watt.Shipping: This item usually ships in 3-5 days. Dimensions: 200 Watt Option: Width 15.5 In., Length 11 In., Height 3 In. 100 Watt Option: Length 11 In., Width 6.5 In., Heig

Misses Flower Power Vase by Kartell $566 The Kartell Misses Flower Power Vase designed by Philippe Starck and Eugeni Quitllet is a decidedly "oversized" vase. The quest for visually striking chromatic effects led to the development of a production technique that brings to life a semi-transparent and irregular surface to produce a vintage glass look. The technology used- produces a single hollow piece, whihc is suitable for containing soil, water, plants or flowers. The round base, the same color as the structure gives the vase excellant stability. The Misses Flower Power Vase features transparent polycarbonate or opaque polyethylene available in 6 colors.. Kartell, headquartered in Italy, creates superb products through its commitment to project, design, and technological innovation. The Kartell Misses Flower Power Vase is available with the following: Included Features:Made of transparent polycarbonate or opaque polyethylene.Suitable for containing soil, water, plants or flowers.Suitable for outdoor use.Designed by Philippe Starck with Eugeni Quitllet.Options:Color: Glossy Black, Glossy White, Kartell Red, Transparent Green (shown), Transparent Red, or Transparent Yellow.Shipping: This item usually ships within 1-2 days. Dimensions: Item: Overall Diameter 22.4 In., Height 64.6 In.

Center Power Feed by Tech Lighting $72 When the transformer cannot be located directly above, the Tech Lighting Center Power Feed can bring power to a Monorail system anywhere within the run. It can be mounted to a standard 4" junction box or directly to a remote transformer. Available as a single-feed or dual-feed (when using a dual-feed transformer). Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Center Power Feed is available with the following: Details: Metal finishRound, removable canopy12' field-cuttable softwire leadsETL ListedOptions: Finish: Antique Bronze, Chrome, or Satin Nickel (shown).Type: Dual-Feed, or Single-Feed.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Ceiling Canopy: Diameter 4 In. Item: Height 2.5 In., Width .7 In.

IceLight High Power LED Desk Lamp by Koncept $174.95 The Koncept IceLight High Power LED Desk Lamp featuring high power LEDs and a head that not only swivels up and down but also twirls a full 360 degrees. The IceLight High Power LED Desk Lamp gives a brighter and broader light compared to the original, consuming only 9 Watts. Koncept Technologies, headquartered in Monterey Park, CA, creates high-quality, innovative products that make life simpler and safer for customers. The Koncept IceLight High Power LED Desk Lamp is available with the following: Details:Made of aluminum and plasticHead rotates 360 degreesAdjustable heightColor Temperature: Daylight -- 4500 K; Warm -- 3500CRI: 8550,000 hr lifespanBuilt-in 4-step dimmerDesk clamp includedUL ListedOptions:Finish: Metallic Black.Light Source: Warm.Lighting: Six 120 Volt LEDs; 9 Watts total (included). Shipping: In Stock items ship within 1 business day. Others usually ship within 7 business days unless otherwise noted. Dimensions: Fixture: Height 14.5 In., Extension 29.5 In. Base: Diameter 9 In. Shade: Length 6 In., Width 3.5 In.

Design Pro LED Undercabinet Mounted Power Supply by Kichler $126 Read first! This item is part of the Kichler Lighting Design Pro LED System. There are four steps to completing this system; you have to configure-to-order this item. See below for details. The Design Pro LED Undercabinet Mounted Power Supply is one part of this system. Since 1938, Cleveland-based Kichler Lighting has created exceptional lighting in a variety of styles, finishes, colors and designs. With a diverse collection of indoor and outdoor lighting in classic and contemporary styles, Kichler Lighting always focuses on making home lighting that is both beautiful and functional. This system requires additional steps for completion. Select and purchase additional needed parts from the list of related itemsbelow. To complete your Undercounter system, you need to select and purchase: Design Pro LED Light or Design Pro LED Disk Light, optional Dimming Switch or Nightlight, Interconnect Cables, and Power Supply. Each item has its step noted. Please call customer service for any questions. This configure-to-order Design Pro System requires 4 steps for completion: (See below for more details.) Step 1. Select your choice of light fixture size and finish (Design Pro LED and/or Design Pro LED Disk), Disk Connector, optional Disc Wire Extension. Step 2. Select an optional Dimmer Switch or Nightlight. Step 3. Select quantity, size and finish of Interconnect Cables. Step 4. Select Power Supply. Step 1. DesignPro LED Disk Light:The Design Pro LED Disc Wire Extension adds 3 feet of length for greater installation flexibility. Step 2. Dimmer Switch or Nightlight: From below, click on the Dimmer Switch and Nightlight option to choose an optional Dimming Switch or Nightlight for your system. Use a Dimming Switch to control the light level. Use a Nightlight when a low light level is desired. Next, select your Interconnect Cables. Step 3. Interconnect Cables: From below, select the quantity, size, and finish of Interconnect cables. For multiple pieces, select item and add to cart one piece at a time. The Interconnect cables connect multiple fixtures together. This is Step 4. Power Supply: Choose this Undercabinet Mounted Power Supply option, or select from below either the Plug-In Power Supply, or Remote Control Power Supply (Design Pro Power Supply Lead needed with this option). The Kichler Lighting Design Pro LED Undercabinet Mounted Power Supply is available with the following: Details:Made of plastic UL ListedETL ListedOptions:Color: Black, or White (shown).Shipping: This item usually ships in 3-5 days. Dimensions: Item: Length 6 In., Height 1 In., Width 5 In.

Power Feed Canopy for Monorail by Tech Lighting $76 Mounted to the ceiling above, the Tech Lighting Power Feed Canopy for Monorail brings power to a Monorail run from a remote transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside the junction box. This Monorail Power Feed Canopy is available in several dual-feed and single-feed options. The Monorail Dual-Feed Canopies provide a total of four independent circuits. Isolating connectors are included to isolate power feeds from each other. For use with a dual-feed remote transformer (sold separately). The shortest rigid standoff that can be used with a Monorail dual-feed canopy is the 2" rigid standoff (sold separately). If dropping the rail more than 2" below the ceiling, order the desired rigid standoff length and two compatible power extenders (sold separately).The Monorail 2" Square Power Feed Canopy Dual-Feed mounts to Tech Lighting's special 2" square, 3.5" deep junction box with mounting bar (included). The Monorail 2" x 4" Rectangular Power Feed Canopy Dual-Feed mounts to a single gang or gem box (not included). The Monorail 4" Round Power Feed Canopy Dual-Feed can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included).The Monorail Single-Feed Canopies provide two independent circuits. For use with a single-feed remote transformer (sold separately). The shortest rigid standoff that can be used with a Monorail single-feed canopy is the 2" rigid standoff (sold separately). If dropping the rail more than 2" below the ceiling, order the desired rigid standoff length and one compatible power extender (sold separately).The Monorail 2" Square Power Feed Canopy Single-Feed mounts to Tech Lighting's special 2" square, 3.5" deep junction box with mounting bar (included).The Monorail 4" Round Power Feed Canopy Single-Feed can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included).Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Power Feed Canopy for Monorail is available with the following: Details:Metal constructionETL ListedOptions:Finish: Antique Bronze, Black, Chrome, Satin Nickel, or White.Type: 2 inch Square Dual-Feed, 2 inch Square Single-Feed , 2 inch x 4 inch Rectangular Dual-Feed, 2 inch x 4 inch Rectangular Single-Feed, 4 inch Round Dual-Feed, or 4 inch Round Single-Feed.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Length 2.5 In.

InvisiLED Class II Remote Power Supply by WAC Lighting $40.5 The WAC Lighting InvisiLED Class II Remote Power Supply act as an aid to keep your InvisiLED Light Strips shining brightly and beautifully throughout your home and eliminates the need for the individual remote power supplies. The InvisiLED Class II Remote Power Supply features a thermoplastic material. WAC Lighting, founded in 1984, has developed a strong reputation for high quality decorative and task lighting. Based in Garden City, New York, WAC Lighting is a leading manufacturer of low voltage, line voltage and LED lighting, including track systems, transformers, lamps, cabinet lighting and recessed downlights. The WAC Lighting InvisiLED Class II Remote Power Supply is available with the following: Included Features:Made of thermoplastic.One 72 in. wire.Hard wiring. 60 watts.UL Listed.Shipping: This item ships within five business days.

Power Extender for Two-Circuit Monorail by Tech Lighting $44 In a Two-Circuit Monorail system, the Power Extender for Two-Circuit Monorail by Tech Lighting drops power from the ceiling when added to a power feed canopy or surface transformer. Available in three finishes and numerous field-cuttable lengths. Note: For dual-feed canopies and transformers, order two. Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Power Extender for Two-Circuit Monorail is available with the following: Details:Metal finishField-cuttableETL ListedOptions:Finish: Antique Bronze, Chrome, or Satin Nickel. Size: 3", 6", 12", 24", 36", 48", or 96".Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Length Adjustable from 3 In. to 96 In.

Rectangular Direct-End Power Feed by Tech Lighting $76 The Tech Lighting Rectangular Direct-End Power Feed mounts perpendicular to a run of Monorail and connects to the end of the run to bring it power from a remote transformer. Use with a single-feed remote transformer (sold separately) and mount to a gem or single gang junction box. Available in three metallic finishes. Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Direct-End Power Feed is available with the following: Details: Metal finishMounts to a gem or single gang junction box (not included, provided by electrician)Use with single-feed remote transformer (sold separately)ETL ListedOptions:Finish: Antique Bronze, Chrome, or Satin Nickel.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Ceiling Canopy: Length 4.5 In., Width 2.9 In. Item: Width 1.3 In.

Z-Bar High Power LED Desk Lamp by Koncept $164.95 The Koncept Z-Bar High Power LED Desk Lamp is an energy efficient task lamp with an innovative space-saving design and knobless adjustability. Consuming only 10.5 Watts of power, the Z-Bar also has a built-in 4-step dimmer. Available in daylight and warm-white light models. Koncept Technologies, headquartered in Monterey Park, CA, creates high-quality, innovative products that make life simpler and safer for customers. The Koncept Z-Bar High Power LED Desk Lamp is available with the following: Details: Made of aluminum and plasticHead rotates 360 degreesAdjusts for angle and height at 3 joints50,000 hr lifespanBuilt-in 4-step dimmer9' cordDesk clamp includedColor Temperature: Warm -- 3500 K; Daylight -- 4500 KCRI: 85Low voltageMade from 38% post-consumer recycled material (by weight)Aluminum housing is fully recyclableUL ListedOptions: Finish: Metallic Black, or Silver. Light Source: Daylight, or Warm.Lighting: Six 12 Volt LEDs; 8 Watts total (included). Shipping: In Stock items ship within 1 business day. Others usually ship within 7 business days unless otherwise noted. Dimensions: Base: Diameter 9 In. Fixture: Height 13.5 In., Extension 42 In.

I-Bar Mini High Power LED Desk Lamp by Koncept $124.95 The Koncept I-Bar Mini High Power LED Desk Lamp is even more compact than the original. The light strip swings up and pivots left and right and folds down against the body when it's not needed. Use with the stand for full freedom, or use the desk clamp to go minimalist. The I-Bar Mini High Power LED Desk Lamp gives a bright, broad light while consuming only 6.5 Watts and has a built-in 4-step dimmer. Koncept Technologies, headquartered in Monterey Park, CA, creates high-quality, innovative products that make life simpler and safer for customers. The Koncept I-Bar Mini High Power LED Desk Lamp is available with the following: Details:Made of aluminum and plasticHead rotates 360 degreesAdjustable baseHead folds downBuilt-in 4-step dimmerDesk clamp includedColor Temperature: Daylight -- 3500 K; Warm -- 4500 KCRI: 85One year manufacture warrantyUL ListedOptions:Finish: Metallic Black, or Silver.Light Source: Daylight, or Warm.Lighting: Four 120 Volt LEDs, 6.5 Watts total (included). Shipping: In Stock items ship within 1 business day. Others usually ship within 7 business days unless otherwise noted. Dimensions: Fixture: Height 13 In., Extension 23.82 In. Base: Diameter 7.5 In.

i-Tower High Power LED Floor Lamp by Koncept $194.95 The Koncept i-Tower High Power LED Floor Lamp is a long lasting energy saving task lamp with simple yet elegant design. The head adjusts to heights of almost 3 - 5 feet, so you are covered whether reading in your favorite lounge chair or lying on your sofa. The i-Tower High Power LED Floor Lamp features High power LEDs and dimmer. Koncept Technologies, headquartered in Monterey Park, CA, creates high-quality, innovative products that make life simpler and safer for customers. The Koncept i-Tower High Power LED Floor Lamp is available with the following: Details: Made of aluminum and plasticHead rotates 360 degreesAdjustable neckHead folds up against stem50,000 hr lifespanBuilt-in 4-step dimmerColor Temperature: Daylight -- 4500 K; Warm -- 3500CRI: 85UL ListedOptions:Finish: Metallic Black, or Silver. Light Source: Daylight, or Warm.Lighting: Six 120 Volt LEDs; 9.5 Watts total (included). Shipping: In Stock items ship within 1 business day. Others usually ship within 7 business days unless otherwise noted. Dimensions: Base: Diameter 9 In. Fixture: Height 43.25 In., Extension 30.5 In.

Power Vault Adapter for Two-Circuit Monorail by Tech Lighting $52 The Power Vault Adapter for Two-Circuit Monorail by Tech Lighting is used to supply power to a Two-Circuit Monorail system when it's installed on a vaulted ceiling. The Power Vault Adapter installs to the power feed (sold separately) and adjusts to any angle to keep rail properly positioned parallel to the floor. Available in three finishes. Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Power Vault Adapter for Two-Circuit Monorail is available with the following: Details:Metal finishETL ListedOptions:Finish: Antique Bronze, Chrome, or Satin Nickel.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Length 1.6 In., Width .6 In.

Modu-licious Power Deskette by Blu Dot $899 Go ahead, get personal at the office. The Blu Dot Modu-licious Power Deskette offers a range of color combinations so your work station can be as individual as you. Mix and match powder-coated steel drawer colors with a number of body finishes and give the office a creative twist. Who says work can't be fun? In 1997, Blu Dot was established in Minneapolis by three college friends with a shared passion for art, architecture and design. Then and today, their goal is to bring good design to as many people as possible, collaborating to create modern home furnishings and accessories that are useful, affordable and exceedingly desirable. The Blu Dot Modu-licious Power Deskette is available with the following: Details:Made of woodPowder-coated steel drawersOptions:Door Finish: FLW Red, Grey Blue, Ivory, Robins Egg Blue, Slate, or White.Drawer Finish: FLW Red, Grey Blue, Ivory, Robins Egg Blue, Slate, or White.Frame Color: Graphite on Oak, Maple, or Walnut.Shipping: This item usually ships within one week. This item is available only in the US. Dimensions: Desk: Depth 23.5 In., Height 28.5 In., Width 47.75 In.

InvisiLED Class II Plug-In Power Supply by WAC Lighting $44.91 The WAC Lighting InvisiLED Class II Plug-In Power Supply has a magnetic and electronic circuit optimized for output power with on/off toggle switch and auto reset and soft start technology. The InvisiLED Class II Plug-In Power Supply features thermoplastic material. WAC Lighting, founded in 1984, has developed a strong reputation for high quality decorative and task lighting. Based in Garden City, New York, WAC Lighting is a leading manufacturer of low voltage, line voltage and LED lighting, including track systems, transformers, lamps, cabinet lighting and recessed downlights. The WAC Lighting InvisiLED Class II Plug-In Power Supply is available with the following: Included Features:Made of thermoplastic.One 72 in. lead wire.60 watts.UL Listed.Shipping: This item ships within five business days.

Z-Bar Mini High Power LED Desk Lamp by Koncept $134.95 The Koncept Z-Bar Mini High Power LED Desk Lamp, little brother to the Z-Bar, is designed for smaller desks and workspaces. The Z-Bar Mini is 36 inches long and thin as your finger, with 6 super adjustable joints so you can pose the lamp anyway you like. The Z-Bar Mini High Power LED Desk Lamp gives a bright, broad light while consuming only 6.5 Watts and has a built-in 4-step dimmer. Available in daylight and warm-white light models. Koncept Technologies, headquartered in Monterey Park, CA, creates high-quality, innovative products that make life simpler and safer for customers. The Koncept Z-Bar Mini High Power LED Desk Lamp is available with the following: Details:Made of aluminum and plasticHead rotates 360 degrees3-point adjustabilityBuilt-in 4-step dimmer6' cordDesk clamp includedColor Temperature: Daylight -- 4500 K; Warm -- 3500 KCRI: 8550,000 hr lifespanMade of 40% pre-consumer recycled material (by weight)One year manufacture warrantyUL ListedOptions:Finish: Metallic Black, or Silver.Light Source: Daylight, or Warm.Lighting: Four 120 Volt LEDs; 6.5 Watts total (included). Shipping: In Stock items ship within 1 business day. Others usually ship within 7 business days unless otherwise noted. Dimensions: Fixture: Height 12.5 In., Extension 35.75 In. Base: Diameter 7.5 In.

I-Bar High Power LED Desk Lamp by Koncept $154.95 The Koncept I-Bar High Power LED Desk Lamp provides bright task lighting in a compact, space-saving design with winning adjustability. Able to fold away into a slim nothing, the sleek size lets you bring adjustable light to even the most space-challenged places. When fully extended, the slim body stays unobtrusive while expertly lighting your desk. Koncept Technologies, headquartered in Monterey Park, CA, creates high-quality, innovative products that make life simpler and safer for customers. The Koncept I-Bar High Power LED Desk Lamp is available with the following: Details:Made of aluminum and plasticAdjustable bodyLight array rotates 360 degreesOver 40,000 hrs of illuminationBuilt-in 4-step dimmerDesk clamp includedOne year manufacture warrantyColor Temperature: Daylight -- 4500 K; Warm -- 3500 KCRI: 85UL ListedOptions:Finish: Metallic Black, or Silver.Light Source: Daylight, or Warm.Lighting: Six 120 Volt LEDs; 9.5 Watts total (included). Shipping: In Stock items ship within 1 business day. Others usually ship within 7 business days unless otherwise noted. Dimensions: Fixture: Height 17.8 In., Extension 31.8 In. Base: Diameter 9 In.

Sound Of Light Invisible Speaker $270 Now you can have your light and hear music, too, with the Sound Of Light Invisible Speaker. This speaker/light socket adds 4" of height however a shorter harp is included so that it can virtually disappear inside an existing lamp shade, and utilizes Texas Instruments Purepath wireless audio technology to transmit music from anywhere within 200 feet of the source. Controllable by remote and expandable with add-on speakers (sold separately). The Sound of Light lamp speaker was developed as the easy, innovative way to get surround sound--by converting standard floor and table lamps into a multi-zone wireless speaker system. The technology behind the Sound of Light wireless speakers/light sockets was made possible by partnering with Texas Instruments. The Sound Of Light Invisible Speaker is available with the following: Details:Made of metal2.4 GHz digital signal transmitter433 MHz receiver for handheld remote control operationOperating range of up to 200 ft.Expandable up to 4 speakersStereo RCA input jacksStereo 3.5mm mini input jackPairing push buttonExternal switching power supplySource audio input2 zone light on/off control, light on LED indicators and volume control2 zone mute function, mute LED indication and linked LED indicationAmplifier - 25Watt Texas Instruments Purepath Class DEach transmitter can operate up to 4 speaker lightsChannel selection: left-mono-right (selector switch)Treble control - knob to adjust treble to compensate for different lampshade densitiesLight control - lighting control relay (on/off)Works with iPods, iPhones, iPads, computers, TV and home stereosETL ListedPlease Note: The Sound of Light Invisible Speaker will increase the height of an existing socket and shade by approx. 4 inches. It comes with a harp size of 7 inches, which can be interchanged with other harp sizes as dictated by the lamp shade. Lighting: One 75 Watt 120 Volt Type A19 Medium Base Incandescent lamp (not included). Shipping: This item usually ships in 7 business days. Dimensions: Fixture: Height 11.5 In., Diameter 4.75 In.

2 Square Direct-End Power Feed by Tech Lighting $140 The 2" Square Direct-End Power Feed by Tech Lighting brings power from a single-feed remote transformer to a MonoRail at an end of the run and mounts to a wall perpendicular to the run. Available in three finishes complementary to the finish of the corresponding MonoRail. Tech Lighting, located in Skokie, IL, develops lighting under the belief that the latest and best new product innovations are the result of quality craftsmanship, attention to even the smallest design detail and drive to consistently bring you something new. The Tech Lighting 2" Square Direct-End Power Feed is available with the following: Details:Metal finishETL ListedMounts to a 2" square junction box (included)Use with a single-feed remote transformerOptions:Finish: Antique Bronze, Chrome, or Satin Nickel (shown).Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Height 2.5 In., Width 1.3 In.

Center Power Feed for Two-Circuit Monorail by Tech Lighting $136 For flexibility in supplying power, the Tech Lighting Center Power Feed for Two-Circuit Monorail can be used anywhere within the run of a Two-Circuit Monorail system to power the system. It can be mounted to a standard 4" junction box or directly to a remote transformer. Available as a single-feed or dual feed (when using a dual-feed transformer). Tech Lighting, located in Skokie, IL, develops lighting under the belief that the latest and best new product innovations are the result of quality craftsmanship, attention to even the smallest design detail and drive to consistently bring you something new. The Tech Lighting Center Power Feed for Two-Circuit Monorail is available with the following: Details: Metal finishRound, removable canopy12' field-cuttable softwire leadsETL ListedOptions: Finish: Antique Bronze, Chrome, or Satin Nickel (shown).Type: Dual-Feed, or Single-Feed.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Ceiling Canopy: Diameter 4 In. Item: Length 3.7 In., Width .7 In.

Power Outside Rigger for Two-Circuit Monorail by Tech Lighting $400 The Power Outside Rigger for Two-Circuit Monorail by Tech Lighting supports and power feeds a Two-Circuit Monorail system from a remote transformer. A central power feed is accompanied by two support outside riggers. Available in three finishes. For use with a single-feed remote transformer (sold separately). Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Power Outside Rigger for Two-Circuit Monorail is available with the following: Details:Metal finishRound wall plate2 support outside riggersETL ListedOptions: Finish: Antique Bronze, Chrome, or Satin Nickel.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Length 36 In., Width 36 In. Wall Plate: Diameter 4 In.

Power Feed Canopy for Two-Circuit Monorail by Tech Lighting $124 Mounted to the ceiling above, the Tech Lighting Power Feed Canopy for Two-Circuit Monorail brings power to a Two-Circuit Monorail run from a two-circuit remote transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside the junction box. This Power Feed Canopy is available in two options: dual-feed and single-feed. The Two-Circuit Monorail Dual-Feed Canopy provides a total of four independent circuits. Isolating connectors are included to isolate power feeds from each other. This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included). For use with a dual-feed Two-Circuit Monorail remote transformer (sold separately). The shortest rigid standoff that can be used with a Two-Circuit Monorail dual-feed canopy is the 2" rigid standoff (sold separately). If dropping the rail more than 2" below the ceiling, order the desired rigid standoff length and two compatible power extenders (sold separately). The Two-Circuit Monorail Single-Feed Canopy provides two independent circuits. This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included). For use with a two-circuit single-feed remote transformer (sold separately). The shortest rigid standoff that can be used with a Two-Circuit Monorail single-feed canopy is the 2" rigid standoff (sold separately). If dropping the rail more than 2" below the ceiling, order the desired rigid standoff length and one compatible power extender (sold separately). Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Power Feed Canopy for Two-Circuit Monorail is available with the following: Details:Metal constructionBlack and White finish options have Satin Nickel feedsETL ListedOptions:Finish: Antique Bronze, Black, Chrome, Satin Nickel, or White.Type: 4 inch Round Dual-Feed, or 4 inch Round Single-Feed.Shipping: This item usually ships within 3 to 5 business days. Dimensions: Item: Width 4 In., Height 2.8 In.

Crystal Light by QisDesign $870 Its light moves from blue to red to green, with a myriad of other hues in between. The QisDesign Crystal Light contains eight crystal-shaped orbs, each of which has two multi-colored LEDs. But what makes the Crystal LEDs magical is what you see when the LEDs are off: a smooth, shiny silver surface that hides the colorful glow waiting within. QisDesign successfully blends fluid organic shapes with advanced LED lighting technology. The resulting LED lamps and pendant lights have won numerous design awards, including the Red Dot, iF and Good Design awards. The QisDesign Crystal Light is available with the following: Details:8 polycarbonate crystal-shaped lightsSilver (vacuum materialized) finish, visible when unlit Magnetic connectors (2 per crystal)On-off switch on miniature remote controlETL ListedIndoor use only recommendedDesigned by QisDesign2009 Red Dot award, 2010 iF China awardLighting: 2 RGB LEDs per crystal (included); 9 watts of power consumed. Shipping: This item usually ships within 3 business days. Dimensions: Crystal Unit: Height 2.88 In., Width 2.88 In.

Ariadni Incandescent Light Dimmer by Lutron $19 The Lutron Ariadni Incandescent Light Dimmer features a traditional toggle switch and smooth linear-style dimmer. The Ariadni Incan Dimmer accepts tradtional-style opening wall plates, such as the Lutron Fassada Wall Plate (sold separately). Lutron, located in Coopersburg, PA, is a comprehensive resource for lighting control solutions for residential and commercial applications. The Lutron Ariadni Incandescent Light Dimmer is available with the following: Included Features:Traditional toggle switch. Linear style dimmer. For incandescent lighting. Maximum capactiy 600 watts. Single-pole (one switch controls one light) wiring. Power failure memory.Options:Color: Ivory, Light Almond, or White (shown).Shipping: This item ships within 24 hours.

Direct End Power Feed for Two-Circuit Monorail by Tech Lighting $80 The Tech Lighting Direct End Power Feed for Two-Circuit Monorail brings power from a remote transformer to the Two-Circuit rail at an end of a run and mounts to a wall perpendicular to the run. Available in three metal finishes to work with the coordinating rail. Use with a single-feed remote transformer. Tech Lighting, headquartered in Skokie, IL, is known for their innovative lighting systems and exquisite lighting designs. Their passion for art, sophistication and imagination is balanced by rigorous testing and quality control in the creation of their line-voltage and low-voltage lighting, including the Tech Lighting FreeJack and monorail systems and track heads. The Tech Lighting Direct End Power Feed for Two-Circuit Monorail is available with the following: Details:Metal finishRound wall plateFor use with single-feed remote transformerETL ListedOptions:Finish: Antique Bronze, Chrome, or Satin Nickel (shown).Shipping: This item usually ships within 3 to 5 business days. Dimensions: Ceiling Canopy: Diameter 4 In. Item: Width 1.3 In.

Maestro Incandescent Smart Light Dimmer by Lutron $41.5 The Maestro Incandescent Smart Light Dimmer by Lutron is where microprocessor technology meets a standard light switch. One quick tap to activate preset dimmer for you-decide light levels; two taps for full brightness, or one, long tap to set 10-second delayed off. LEDs indicate light level and glow softly as a locator light. Designed for incandescent fixtures, this smart dimmer can be used for single-pole wiring installation (for one light controlled by one switch) or three-way wiring installation for a light controlled from more than one switch. To dim and switch a light from multiple locations, use Maestro accessory dimmers (Call customer service for more information). Power failure memory. Lutron, located in Coopersburg, PA, is a comprehensive resource for lighting control solutions for residential and commercial application. The Maestro Incandescent Smart Light Dimmer by Lutron is designed to accept a designer-style (large opening), Claro Wall Plate by Lutron (sold separately) for a perfect color match. Maximum capacity 600 watts. The Maestro Incandescent Smart Light Dimmer by Lutron fits a standard junction box and is available with the following options: Color: White (shown), Light-almond, or Ivory Shipping: This item usually ships within 24 hours.

265 Wall Light by Flos $1032 The Flos 265 Wall Light was originally introduced by designer Paolo Rizzatto in 1973. The contemporary concept is still incredibly relevant, especially for today's professional yet relaxed lifestyles. The steel arm has a broad sweep and swivels easily via a tapered cast iron counterweight, and the chrome plated brass shade adjusts as well. FLOS Lighting, headquartered in Italy, provides innovative concepts and classic products through technical excellence and a high-quality approach to lamp design. The Flos 265 Wall Light is available with the following: Details:Chrome plated brass shadeSteel supportsMounting BracketSwivel armCast iron tapered counterweight80" power cordNot UL/ETL ListedDesigned by Paolo Rizzatto, 1973Options:Finish: Black, or Grey.Lighting: One 75 Watt 120 Volt Type A19 Medium Base Incandescent lamp (not included). Shipping: This item usually ships within five business days. Dimensions: Shade: Overall Diameter 6.3 In. Mounting Bracket: Height 13.7 In., Depth 34.3 In. Arm: Length 80.8 In.

Design Pro LED Night Light by Kichler $52.5 Read first! There are four steps to completing this Design Pro System; you have to configure-to-order this item. See below for details. The Kichler Design Pro LED Night Light is one part of this system. Since 1938, Cleveland-based Kichler Lighting has created exceptional lighting in a variety of styles, finishes, colors and designs. With a diverse collection of indoor and outdoor lighting in classic and contemporary styles, Kichler Lighting always focuses on making home lighting that is both beautiful and functional. This system requires additional steps for completion. Select and purchase additional needed parts from the list of related itemsbelow. To complete your Undercounter system, you need to select and purchase: Design Pro LED Light and/or Design Pro LED Disk Light, optional Dimming Switch or Night Light, Interconnect Cables, and Power Supply. Please call customer service for any questions. This configure-to-order Design Pro System requires 4 steps for completion: (See below for more details.) Step 1. Select your choice of light fixture size and finish (Design Pro LED and/or Design Pro LED Disk), Disk Connector, optional Disc Wire Extension. Step 2. Select an optional Dimmer Switch or Night Light. Step 3. Select quantity, size and finish of Interconnect Cables. Step 4. Select Power Supply. Step 1. DesignPro LED Light: From this page, select the desired size andfinish of Lights you would like by adding each new style to the shopping cart and continuing to add to the cart until the desired number of lamps has been chosen. This is also a good time to select any Design Pro LED Disk fixtures for your configuration. After choosing your lights, select an optional Dimmer or Night Light. If you do not wish to choose one, proceed to Step 3: Interconnect Cables. This is Step 2. Optional Dimmer Switch and Nightlight: Choose an optional Dimming Switch or Night Light for your system. Use a Dimming Switch to control the light level. Use a Night Light when a low light level is desired. Next, select your Interconnect Cables. Step 3. Interconnect Cables: Click on the Interconnect Cables image from below. Select the quantity, size, and finish of Interconnect cables. For additional different sizes, select item and add to cart one piece at a time. The Internet cables connect multiple fixtures together. Next step is choosing your power supply option. Step 4. Power Supply: From below, select your desired Power Supply link. Choice includes: Under Cabinet Mounted Power Supply, Remote Control Power Supply (Design Pro Power Supply Lead needed with this option; options will appear on product page), or Plug-In Power Supply. The Kichler Design Pro LED Night Light is available with the following: Details:Made of polycarbonate Can be installed directly to the supply lead or placed between any two fixturesUL ListedETL ListedOptions:Color: Black (shown), or White.Shipping: This item usually ships in 3-5 days. Dimensions: Item: Height .5 In., Width 3.5 In.,

Sound Of Light Invisible Add-on Speaker $170 Create an invisible surround sound system with the Sound Of Light Invisible Add-on Speaker by retrofitting an existing lamp socket with this wireless speaker add-on. The speaker/light socket adds 4" of height however a shorter harp is included so that it can virtually disappear inside an existing lamp shade. You can operate up to three add-on speakers with the original Invisible Speaker system (sold separately), up to 200 feet from the source. The Sound of Light lamp speaker was developed as the easy, innovative way to get surround sound--by converting standard floor and table lamps into a multi-zone wireless speaker system. The technology behind the Sound of Light wireless speaker/light socket was made possible by partnering with Texas Instruments. The Sound Of Light Invisible Add-on Speaker is available with the following: Details: Made of metal 433 MHz receiver for handheld remote control operation Operating range of up to 200 ft. Stereo RCA input jacks Stereo 3.5mm mini input jack Pairing push button External switching power supply Source audio input 2 zone light on/off control, light on LED indicators and volume control 2 zone mute function, mute LED indication and linked LED indication Amplifier - 25Watt Texas Instruments Purepath Class D Channel selection: left-mono-right (selector switch) Treble control - knob to adjust treble to compensate for different lampshade densities Light control - lighting control relay (on/off) Works with iPods, iPhones, iPads, computers, TV and home stereos ETL ListedLighting: One 75 Watt 120 Volt Type A19 Medium Base Incandescent lamp (not included). Please Note: The Sound of Light Invisible Speaker will increase the height of an existing socket by approx. 4 inches. It comes with a harp size of 7 inches, which can be interchanged with other harp sizes as dictated by the lamp shade. Shipping: This item usually ships in 7 business days. Dimensions: Fixture: Height 11.5 In., Diameter 4.75 In.

Maestro Low Voltage Electronic Light Dimmer by Lutron $168 The Lutron Maestro Low Voltage Electronic Light Dimmer is where microprocessor technology meets a standard light switch in variable touch-control dimming activation. The Maestro Electronic Dimmer is designed to accept a designer-style (large opening) wall plate such as the Lutron Claro Wall Plate (sold separately). Lutron, located in Coopersburg, PA, is a comprehensive resource for lighting control solutions for residential and commercial application. The Lutron Maestro Low Voltage Electronic Light Dimmer is available with the following: Included Features: Variable dimming levels. 10-second delayed off function. LED light-level indicators. Maximum capacity 600 watts. For use with electronic transformers. Single-pole (one light) or three-way wiring. Power failure memory.Options: Color: Ivory, Light Almond, or White (shown).Shipping: This item ships within 24 hours.

Maestro Low Voltage Magnetic Light Dimmer by Lutron $95 The Lutron Maestro Low Voltage Magnetic Light Dimmer is where microprocessor technology meets a standard light switch in variable touch-control dimming activation. The Maestro is designed to accept a designer-style (large opening) wall plate such as the Lutron Claro Wall Plate (sold separately). Lutron, located in Coopersburg, PA, is a comprehensive resource for lighting control solutions for residential and commercial application. The Lutron Maestro Low Voltage Magnetic Light Dimmer is available with the following: Included Features: Variable dimming levels. 10-second delayed off function. LED light-level indicators. Maximum capacity 600 watts. For use with magnetic transformers. Single-pole (one light) or three-way wiring. Power failure memory.Options: Color: Ivory, Light Almond, or White (shown).Shipping: This item ships within 24 hours.

Skylark Low Voltage Magnetic Light Dimmer by Lutron $55 The Skylark Low Voltage Magnetic Light Dimmer, by Lutron, is a designer-style, high quality light dimmer for use with magnetic transformers. Preset, or slide to on/off. Uses standard, single-pole wiring (one switch controls one light) for easy installation. Power failure memory. Located in Coopersburg, PA, Lutron is a comprehensive resource for lighting control solutions for residential and commercial application. The Skylark Low Voltage Magnetic Light Dimmer, by Lutron, accepts the Claro Wall Plate, by Lutron. The wallplate features a designer (large) opening, a clean appearance with no visible screws and a perfect color match (sold seperately). To purchase the Claro Wall Plate, see below. The Skylark Low Voltage Magnetic Light Dimmer has a capacity of 450 watts and is available with the following options: Color: White, Light-almond (shown), or Ivory Shipping: This item usually ships within 24 hours.

InvisiLED Light Strips by WAC Lighting $5.31 The WAC Lighting InvisiLED Light Strips is as easy to install as Peel and Stick, offering energy efficient LED lighting, long life and a crisp quality light source that is virtually invisible once installed. The InvisiLED Light Strip can be used in many applications such as miniature coves, accent lighting under counters, bars and toe kick areas and much more. The InvisiLED Light Strips features thermoplastic material. WAC Lighting, founded in 1984, has developed a strong reputation for high quality decorative and task lighting. Based in Garden City, New York, WAC Lighting is a leading manufacturer of low voltage, line voltage and LED lighting, including track systems, transformers, lamps, cabinet lighting and recessed downlights. The WAC Lighting InvisiLED Light Strips is available with the following: Included Features:Made of thermoplastic.Backed with 3M construction adhesive allowing for fast, permanent installationMale and female connectors.UL Listed. Maximum run of 25 feet per 60 watt Class 2 power supply.Options:Color: Amber, Blue, Green, Red, or White.Size: 1 feet, 2 inch, or 5 feet.Shipping: This item ships within five business days.