Barry Melek Electric Train Sets

Upgrade Kit

Upgrading the Headlight Bulb on a Suzuki VX800 Motorcycle

I've got a Suzuki VX800 motorcycle, and like many older single headlight bikes, the light output on both dipped or main beam is poor. The low output limits visible distance at night, and so limits speed, and also means that the blinding effect of oncoming vehicles is more pronounced.

I chose an Osram Night Breaker +90% bulb with a H4 fitting suitable for the bike. These bulbs claim to give 90% more light output, but still fit into the standard fitting, and draw the normal 60/55 watts. This means that they are a direct replacement to the existing standard headlight bulb. I did consider upgrading to a Xenon HID headlight, but a proper upgrade kit costs considerably more, and requires adding a ballast unit and modifying the bulb wiring.

 

Fitting the new Osram Night Breaker Headlight Bulb

The process for replacing the bulb is exactly the same as for most single lamp 'naked' motorcycles. Here's a quick summary:

• First job was trying to get into the Osram Night Breaker packaging! Remove all the paper cover, press on the top of the case to unclip it, and then slowly work the front half and back half apart. They are held together by tabs at the top and bottom, and take a little force to get apart.
• Unscrew the headlight unit retaining screws - on this bike, they are on the sides of the headlight unit (arrowed). The screws can corrode, in which case apply some penetrating oil and wait for 10 minutes to prevent you rounding the heads off. Take care not to alter the smaller screw at the front. This is used to adjust the angle of the beam to prevent dazzling oncoming traffic. Once unscrewed, the headlight unit will pull forward out of the rear cover.
• Disconnect the power cables to the headlight bulb, and the parking light bulb. Once this is done, you can remove the rubber waterproofing cover, and unscrew the retaining ring by turning anticlockwise by a small amount.
• Now remove the existing bulb and replace with the Osram Night Breaker +90%. Take care not to touch any part of the glass with your fingers, as dirt or oil can cause the bulb to overheat and possibly shatter. The H4 bulb will only go in one way round to ensure the dipped and main beam works correctly.
• Replacement is the opposite of removal. Place the retaining ring back on to the fitting and turn a small amount clockwise to lock into place. Replace the rubber waterproofing cover, and ensure a close fit to the headlamp body. Take the unit back to the bike and reconnect the headlight and parking light power connectors. Put the headlight unit back into the rear cover, ensuring the screw holes line up. Replace the retaining screws, taking care not to over-tighten them.

 

Does it Work?

Now for the moment of truth: is the extra cost for the Osram Night Breaker +90% bulb worth it? I've done a before and after shot. In both cases, the camera was locked to the same settings (1/500th at F4) so that you can compare the light output.

You can see from the before and after images that there does seem to be a considerable increase in light output.

In practice, riding through Dorset countryside on a dark night, the new bulb gives considerably greater visibility at long range, giving reflections from road signs and cats eyes for a massive distance on straight roads. Even on dipped beam, the extra light gives better visibility of the road surface ahead when facing oncoming traffic. No-one flashed me or otherwise indicated that the new lights were blinding them, so the beam pattern has not been affected.

On main beam, it's much easier to see further into corners. The light is brighter and whiter, which allows for more scatter, so even objects not in the direct path are more visible. For a cost of £17.50 for a pair of bulbs from AutobulbsDirect (I saved one as a spare), this has to be the most cost-effective upgrade I have made!

 

About the Author

Jonathan Elder is a web site writer for a group of companies including:

• Autobulbs Direct - Online retailer of car light bulbs, wiper blades and accessories
• HIDs4U - Online retail of Xenon HID Convdersion Kits
• WiperBlades4u - Online retailer of Wiper Blades
• eWayDesigns - Website, online shopping and eBay listing developers

Da55-To-Da60 Upgrade Kit $31.99 DA55-TO-DA60 UPGRADE KIT

PostScript/PDF Upgrade Kit - Printer upgrade kit $1999.99 HP PostScript/PDF Upgrade Kit - Printer upgrade kit - for DesignJet T7100

IBM Dual Core X3 Upgrade Kit System Upgrade Kit 39Y6580 $315.45 IBM Dual Core X3 Upgrade Kit System Upgrade Kit 39Y6580

Premium Skid Upgrade Kit $30.99 Premium Skid Upgrade Kit; 1/4 in. Gauge Steel;

IBM System Upgrade Kit 73P9715 $114.68 IBM System Upgrade Kit 73P9715

HP CN500A Upgrade Kit CQ745A $1905.22 HP CN500A Upgrade Kit CQ745A

Nimh Rechargeable Battery Upgrade Kit $19.99 NIMH RECHARGEABLE BATTERY UPGRADE KIT

Pro Comp Front Driveshaft Upgrade Kit $487.99 Front Driveshaft Upgrade Kit;

Productivity Kit - Printer upgrade kit $499 Xerox Productivity Kit - Printer upgrade kit - for Phaser 8560

Solution Kit - printer upgrade kit $447.99 Ricoh Solution Kit - Printer upgrade kit - for Aficio SP 4310N

HP CQ743A Upgrade Kit $1909.99 CQ743A CQ743A Roll Upgrade Kit HP HP Designjet T7100 Series Printer Hewlett-Packard Upgrade Kit www.hp.com

Xerox Upgrade Phaser 8560N to Phaser 8560DN Printer Upgrade Kit 097S03822 $209.22 Xerox Upgrade Phaser 8560N to Phaser 8560DN Printer Upgrade Kit 097S03822

Zebra USB Upgrade Kit $83.99 105912-202 Zebra P310C Card Printer Zebra P420C Card Printer Printer Accessory Kit USB Upgrade Kit Zebra Zebra Technologies Corporation www.zebra.com

Zebra 103939 Upgrade Kit $9.99 103939 103939 Quick Fit Hub Kit with Screws Upgrade Kit Zebra Zebra TTP 2000 Printer Zebra Technologies Corporation www.zebra.com

Wheeler 748555 Screwdriver Upgrade Kit $49.91 Screwdriver Upgrade Kit . Manufacture ID: 748555. Deluxe Screwdriver 17 Piece Upgrade Set

Redundant fan upgrade kit $89.99 HP - Redundant fan upgrade kit - for ProLiant DL165 G7 DL165 G7 Base DL165 G7 Performance

System upgrade kit $711.99 HP - System upgrade kit - for ProLiant DL585 G7 DL585 G7 Base DL585 G7 Performance

Tire Carrier Upgrade Kit $65.99 Tire Carrier Upgrade Kit; Swing-Out; Incl. Cam Over Latch And Bracket;

Disk Brake Upgrade Kit $1315.99 Disk Brake Upgrade Kit; Incl. Front And Rear Rotors/Front And Rear Pads;

Chattanooga Alliance Battery Power HE Upgrade Kit $744.99 Battery Power HE Upgrade Kit for use with CHT-1900.

BCI Printer Upgrade Kit for Mini-Torr Plus $514.71 BCI Printer Upgrade Kit for Mini-Torr Plus

BCI Oximetry Upgrade Kit for Mini-Torr Plus $718.2 BCI Oximetry Upgrade Kit for Mini-Torr Plus

3Com 8-Ports Capacity ATM Upgrade Kit 3C37070 $60 3Com 8-Ports Capacity ATM Upgrade Kit 3C37070

Cisco Wism Compact Flash Upgrade Kit Wscfupgkitwism $392.4 Cisco Wism Compact Flash Upgrade Kit Wscfupgkitwism